Overrun Errors While Using Rabbet or CommPlus II

Overrun Errors While Using Rabbet or CommPlus II

Postby gseadmin » Wed Apr 08, 2009 7:12 am

I am sending a program from Rabbet and the indicator displays an OVERRUN error?

Re: Overrun Errors While Using Rabbet or CommPlus II

Postby gseadmin » Wed Apr 08, 2009 7:13 am

While using Rabbet or CommPlus II, 60 Series or 350 Series Indicator Displays Overrun Error
An overrun error occurs when additional characters were received while the receive buffer was full. The additional characters sent will be lost. This error can be solved by using a line delay (in Comm Plus II, line delay is called a transmit delay).

Rabbet Line Delay:
* Click on COM...Configure Settings.
* Put in a line delay of about 50 mS. If the overrun error still occurs, increase the line delay to 100. This will slow the transmission speed from Rabbet.

Rabbet Line Delay Example

Comm Plus Transmit (Xmit) Delay:
* Click on "Xmit Delays" menu.
* Click on "Line Delay On" to turn on line delay.

Comm Plus Xmit Delay
* Window will open, enter in "50" into the "Line Delay in milliseconds" box.
* Press "Done".

Comm Plus Xmit Delay


Return to Comm Plus



cron