355 ID Number Entry

355 ID Number Entry

Postby gseadmin » Tue Apr 07, 2009 1:35 pm

How do I enter in an ID on a 355?

Re: 355 ID Number Entry

Postby gseadmin » Tue Apr 07, 2009 1:38 pm

With the Model 350 Series, it is possible to enter an ID number and have it print out on a ticket.

* P210 or P230 must be set to ID.
* P213 or P233 must be set to "cust".
* P1000 or P2000 must contain Parameter 21. Use a format of 128 to remove the name "id" from the transmit.

Enter an ID from the weigh mode:

Model 350:
1. Press the [PRINT] key from the weigh mode. The display will show the current ID number if one has been entered previously.
2. If the ID number shown is acceptable, press [TARE]. This will print a ticket. ~or~
3. If the ID number shown is not acceptable, key in the desired ID number (numeric and/or alphnumeric) and then press [TARE]. This will print a ticket.

Model 355:
1. Press the [PRINT] key from the weigh mode. The display will show the current ID number if one has been entered previously.
2. If the ID number shown is acceptable, press [ENTER]. This will print a ticket. ~or~
3. If the ID number shown is not acceptable, key in the desired ID number (numeric and/or alphnumeric) and then press [ENTER]. This will print a ticket.


Return to 350 Series



cron