Initializing a 350/355 Keypad

Initializing a 350/355 Keypad

Postby gseadmin » Wed Apr 08, 2009 7:37 am

I have replaced the mainboard on my 350 series indicator, but now my keypad doesn't work. Do I need to initialize the keypad? If so, how do I initialize the keypad?

Re: Initializing a 350/355 Keypad

Postby gseadmin » Wed Apr 08, 2009 7:37 am

Model 355:
Hold the [ENTER] key on power up. The display will show "EntHld". Press CLR to exit.

Model 350:
Hold the [TARE] key while powering up the indicator (using the SELECT/ON key). The display will show "EntHld". Press CLR to exit.


Return to 350 Series



cron